Manufacturing Process
Code Identification
Recommendations
 
 
1. Treatment
All coated abrasives should be handled carefully,Mechanical damage can be caused by mishandling, Which
should be avoided.
 
2. Keeping
Coated abrasives should be stored in dry, frost free condition.
They should be kept away from heat sources,cold,damp walls ,doors or window and should not be in direct
contact with the floor. Temperature and humidity should be between 18~22¡É and 45%~65% Relative Humidity.
Coated abrasives should not be exposed to direct sunlight.
 
3. Recommendations for use
Worker have to wear Safety goggles, ear muffs, safety gloves, dust masks and , if grinding conditions are severe,
additonal face protection, leather apron and safety shoes must be worn.
Coated abrasives shoul not be used near inflammable material or in an environmernt where there is a risk of
explosion.
Fiber discs must be used with a back-up pad of the correct size.
On removal from their packing belts should be preconditioned by hanging them over a rod or peg of not less than
50mm diameter.
They must not be hung from a nail as this may cause cracking and failure.
Run lap jointed belts in the direction indicated by the arrow.
Do not use belts which have been modified in any way after delivery.
Keep contact wheels, platens, idler pulleys, etc in good condition.
Never leave belts under tension on a stationary machine.